कामिक आगम: पूर्व भाग (अष्टाविंशति मूल शैव आगमों का प्रथम एवं सर्वोच्च आगम महाकोश)
Kamika Agama: Purva Pada (Primary Shaiva Agama)
सद्योजात शिवमुखोद्भूत (सम्पादक: सी. स्वामीनाथ शिवचार्य) द्वारा
पृष्ठ 745, कुल 1174 में से
संदर्भ में पढ़ें4, 3 and 2 parts should be left out in the lower portion. O, the great Sages!, the interspace
between the two sloping lines should be in 3 parts, 1 part or 2 parts of the brhma sutra.
The top point of the line should be half of these measures. The carving of the lines should
be with a depth of 1 barley(yava)grain. Thickness of the lines also should be with the
same measure of 1 yava. The depth and thickness may be 8 yavas for the superior type
of linga. This measure should be gradually reduced for the medium and smaller lingas.
O, the foremost among the twice-borns!, the directions for drawing the characteristic lines
for the nagara linga have been told in this way.
द्रामिडे शिवभागे तु त्रिपञ्चांशे कृते क्रमात् ।। ११७
नवभागैर्दशांशेन ह्येकादश विभागकैः ।। ११८
हीनमध्योत्तमाख्यं तु लक्षणोद्धारकं भवेत् ।
सप्ताष्टनवभागेभ्यस्सूत्रे संलंबयेत्क्रमात् ।। ११९
त्रिचतुर्द्व्यंशके हीने यूतिस्स्यात्पक्षसूत्रयोः ।
मध्यमे भूतवेदाग्नि यूकैश्रापि युतिर्भवेत् ।। १२०
षड्भूतवेदवह्न्यंशैश्श्रेष्ठे पृष्ठे तयोर्युतिः ।
स्वभागात्सूत्र विस्तारः पक्षसूत्रं पुरोक्तवत् ।। १२१
dra'mid'e s'ivabha'ge tu tripan"ca'ms'e kr'te krama't // 117
navabha'gair das'a'ms'ena hyeka'das'a vibha'gakaih // 118
hi'namadhyottama'khyam tu laks"an.oddha'rakam bhavet /
sapta's"t'anavabha'gebhyas su'tre samlambayet krama't // 119
tricaturdvyams'ake hi'ne yu'tissya'tpaks"asu'trayoh /
madhyame bhu'taveda'gni yu'kais'ca'pi yutir bhavet // 120
s"ad'bhu'ta veda vahnyams'ais' s'res"t'e pr's"t'he tayor yutih /
svabha'ga't su'travista'rah paks"a su'tram puroktavat // 121
In the dravida linga, the rudra bhaga should be divided into 15 parts and the central
line should start form the ninth part. If the rudra bhaga is divided into 11 parts, the
central line should start from the tenth part. The caharacteristic lines are to be carved
according to the smaller, medium and superior types. The side lines which are sloping
downwards should start form the seventh, eighth and ninth parts. The joining of the
side lines at the back should be at a point located at 3, 4 and 2 parts in the lower portion.