कामिक आगम: पूर्व भाग (अष्टाविंशति मूल शैव आगमों का प्रथम एवं सर्वोच्च आगम महाकोश)

The fixing of the chest-frame should be below the horizontal line passing through the base of
the neck. The length of the hip-frame should be 7 digits. The thickness of the hip-frame on the
two sides of the central frame should be 3 digits. The lateral finial of the hip-frame should be
with a length of 3 digits.
ब्रह्मभागस्य तारेण तन्मध्ये सुषिरं नयेत्।
चतुरश्रस्य तारेण मानार्धं द्व्यङ्गुलं न्यसेत्॥ १९
द्विमात्रं नाभ्यधस्तात्तु हित्वात्र कटिदण्डकम्।
योजयेद्ब्रह्मदण्डे तु सुस्निग्धं सुदृढं नयेत्॥ २०
brahmabhāgasya tāreṇa tanmadhye suṣiraṁ nayet|
caturaśrasya tāreṇa mānārdhaṁ dvyaṅgulaṁ nyaset|| 19
dvimātraṁ nābhyadhastāttu hitvātra kaṭidaṇḍakam|
yojayedbrahmadaṇḍe tu susnigdhaṁ sudṛḍhaṁ nayet|| 20
A hole should be made in the middle of the hip-frame with a measure equal to the thickness
of the brahma danda(central frame). The width of the hip-frame should be 2 digits in addition
to half the unit measure of the four-sided portion of the central frame. Leaving out 2 unit
measure below the navel, this hip-frame should be fixed with the brahma danda. It should be
unswervingly joined with the brahma danda.
ऊरुदण्डाग्र विस्तारः कोरकेति च संमतम्।
तस्य मूले तु सुषिरं शिखामानेन कारयेत्॥ २१
तस्याग्रे तु शिखां कुर्यात् पक्षमात्रप्रमाणतः।
कटिदण्डे शिखायां च ऊरुदण्डं च योजयेत्॥ २२
ūrudaṇḍāgra vistāraḥ koraketi ca saṁmatam|
tasya mūle tu suṣiraṁ śikhāmānena kārayet|| 21
tasyāgre tu śikhāṁ kuryāt pakṣamātrapramāṇataḥ|
kaṭidaṇḍe śikhāyāṁ ca ūrudaṇḍaṁ ca yojayet|| 22